|
Ground
Force Post Hole Digger
Heavy Duty Rock Diggers & Augers
Drill
through solid rock with the
GROUND FORCE Post Hole Diggers.
This
down pressure post hole digger diverts the weight of the tractor to the drilling
surface of the bit, increasing digging performance. Ground Force is a complete down pressure post hole digger for Category 2-Three
Point Hitch. It comes comes with 88 HP Gear Box, N35 series PTO Shaft and Carbide Bullet
Tooth Rock Augers that will drill in rock conditions, including SOLID rock. Augers
are available from 6 inch to 24 inch diameter. We also offer a
skid steer mount option.
The skid steer auger driver comes complete with hydraulic hose and
couplers.
Two Models to Chose From
with Factory Direct Pricing
There is a GROUND FORCE digger that is
perfect for your application. The PHD75 is great for standard post
hole digging, while the SDO6170 packs added punch for bigger jobs.
Below: The Harleman
MUSTANG skid Loader mounted Digger with Rock Auger....
|
Model
PHD75 |
|
Model
SD061700 |
$2350
Complete w/ 12" Dirt Auger
$2850 Complete w/ 12" Carbide Bullet Tooth
Rock Auger |
 |
$3350
Complete w/ 12" Dirt Auger
$3850 Complete w/ 12" Carbide Bullet
Tooth Rock
Auger |
Power
Shaft - G&G N 35 Series
Down Pressure - Pressure Reg. Valve to 4000 lbs.
Gear Ratio - 88 HP 4:1
Augers - 6 in. to 24 in.
Drilling
Depth - 5 ft
Input Shaft - 1 3/8 Six Spline
Output
Shaft - 2 in. round w/ 2 shear bolts
Tractor Requirements - 60 HP or Larger
Cat 2 Hitch
Hyd Requirements - 1 set dual remotes
Drilling Conditions -
Solid Rock, Chunk Rock or Dirt |
Power
Shaft - Torque Limitter (No Shear Pins)
Down Pressure - Pressure Reg. Valve
to 5000 lbs.
Torque - 3500 Ft. Pounds at Auger
Gear Ratio - 17:1 Planetary
Drive
Augers - 6 in. to 48 in.
Drilling Depth
- 5 ft.
Input Shaft - 1 3/8 Six Spline
Output Shaft - 2 in. Hex
Tractor
Requirements - 1 set dual remotes
Drilling Conditions - Solid Rock, Chunk Rock
or Dirt |
Down
Pressure Conversion Kit
This Kit comes with a New Frame, Lock Down, Hydraulic
Cylinder and a Hose Kit, the only parts you use from your old digger is PTO Shaft,
Gear Box and Auger and will convert all Post Hole Diggers to a digger that will
drill rock when fitted with a Rock Auger.
Skid Steer Mount
Auger Driver
Model 3376 -
$1850 Complete
w/
Hyd Hose & Couplers.
Auger sold separately
Specifications:
Torque - 3023 FT Pounds
Hyd
Planetary Drive - 5:5:1
Ratio
Mounting -
Quick Attach
Recommended Augers --6 inches
to 36 inches
Output Shaft - 2 inch hex
|
